Electric Boil Kettle | 7 bbl

Our 7 bbl Electric Boil Kettle features three 9,000W heating elements, dedicated tangential whirlpool port, condensation ring, and a host of other features guaranteed to satisfy the users expectations.

A float switch is pre-installed just above the heating elements, which is intended to protect your elements from running dry. The device comes unwired and needs to be included in a circuit in order to function.

MB professional brewing equipment is designed by our in-house team of R&D designers. Brewhouse design is led by Colin Kaminski, a product designer who became a brewmaster for 15 years and combined both skills into brewing equipment design. Cleanability, ease of use, and durability are our primary design criteria. Large-scale equipment is manufactured internationally, while our in-house metal shop gives us the unique ability to perform R&D and fabricate as needed. Quality control is executed at our factory and upon receipt in our warehouses.

Boil Kettle Features:

• Insulated walls for safety and energy efficiency
• Condensation ring to keep flue condensation from entering the boil (Myrcene Ring)
• Tangential port for whirlpool
• Side drain with hop dam for easy whirlpooling and good trub separation
• Dished bottom with 2" center drain for easy trub clean up
• Fill Port for adding dilution water
• Float Switch to protect the electric elements from running dry (wiring required)
• Powered by Three 15,000-watt 3-phase 208V elements
  
• Total Amperage Draw: 125 amps at 3ph 208V
  
• The kettle must be grounded
• PT100 Temp Sender
• Analog Temp Gauge for quick reading
• CIP Ball
• Glass Manway Door
• Internal LED Light

Boil Kettle Specifications:

• Grade 304 Stainless Steel
• Internal Finish: #2B
• Tank Height: 71"
• Tank Diameter: 50"
• Empty Weight: 746 lbs
• Working Volume: 7 bbl
• Max Volume: 9.9 bbl
• All ports are 1.5" TC except for DN350 Manway, DN219 Vent Port, DN80 LED Light Port, 2" TC Drain Outlet, 2" TC Element Ports

Important Electrical Notes:

1. This unit is supplied without controls for the electric elements. You will need to supply your own control panel.
2. The kettle must be grounded
3. The power requirements listed represent actual amperage draw. Please consult a licensed electrician to determine what amperage breaker is required based on your local codes.
4. This Electric Hot Liquor Tank requires a professional electrician for installation.